PRO SERIES® PhosREMOVE

Professional strength phosphate remover

Reducing phosphate levels in swimming pools is easy with Natural Chemistry’s PRO SERIES phosREMOVE. This product is a lanthanum based formulation. PRO SERIES phosREMOVE effectively and efficiently removes phosphates and reduces pool problems!


  • Reduces high phosphate levels with limited turbidity
  • Can be used as a maintenance product to keep phosphate levels near zero

Instructions

Directions for use:

  1. Backwash filter and maintain proper chemical levels.
  2. With the circulation system operating, slowly add product directly to pool, skimmer, gutter or surge tank.
  3. Vacuum if required
  4. Backwash/ clean filter as necessary (or within 48 hours).

Note: Apply in accordance with your state and local pool regulations. Removing high phosphate levels may temporarily cause pool water cloudiness/turbidity. For high phosphate removal it is recommended to divide the initial dose into at least three separate applications to reduce the possibility of turbid or cloudy water.

RETEST PHOSPHATE LEVELS AFTER 48 HOURS. (Repeat as necessary).

Dosage Chart:

Phosphate reduction varies based on phosphate concentrations. Recommendations are for estimation purposes only. Based on lab test, results may vary.

PPB 10,000 gal 20,000 gal 50,000 gal 100,000 gal 200,000 gal 300,000 gal
1,000 2oz 4oz 10oz 20oz 40oz 60oz
3,700 4oz 8oz 20oz 40oz 80oz 120oz
5,100 8oz 16oz 40oz 80oz 160oz 240oz
7,800 16oz 32oz 80oz 160oz 320oz 480oz
10,000 32oz 64oz 160oz 320oz 640oz 960oz
12,000 48oz 96oz 240oz 480oz 960oz 1440oz

Maintenance Dose:

Weekly add 1oz per 6,000 gallons of pool water.

Important: Algae must be treated prior to testing or treating phosphates. Chlorine must be under 5ppm before testing phosphates.

NOTE: For use in swimming pools only.

  Printable version   Dosage Calculator