Scalefree®

Phosphate free stain and scale prevention

Scalefree protects pools from the damaging effects of scale buildup and staining due to excessive calcium, iron, copper and other minerals. It works without the use of phosphates or harsh acids.

Scalefree also works to prevent scale from forming on salt generator cells, helping to maintain optimum performance.

Note: This product can be used with most sanitizing systems and is compatible with all pool surfaces. Do not use with biguanides.

Have a question or comment about this product?

Get in touch

Available Sizes

2L/67.6oz.

SKU: 76210NCM

Details

Product Education

MSDS

Phosphate and acid free formula
Compatible with all pool surfaces
Protects against calcium and mineral scale buildup
Controls metal staining
Helps protect salt generator cells from life shortening damage caused by scale

INSTRUCTIONS

Directions for use:

Do not exceed recommended dose.

Note: Cationic polymers used in many clarifiers, flocculants and polyquat algaecides should not be dosed to swimming pool water at the same time as metal control products. Cloudy water, precipitation and reduced product effectiveness may result. Wait 24 hours between additions.

Do not use with biguanides.

Directions for use:

This product is designed for use in properly balanced pool water.

Following dosage chart below, add the recommended initial dosage of Scalefree to the pool water evenly around the edges.

Note: If water hardness level in existing pool water is above 400ppm (parts per million), follow recommendations for fresh fill initial dose. Brushing is required. After initial dose, proceed with double the recommended monthly dosage.

Dosage Chart

Pool Size

10,000 gallons

20,000 gallons

Initial Does

Fresh Fill

64oz

128oz

Existing Pool Water

32oz

64oz

Maint.