® Filter Cleaner ™ Professional Strength - Professional Results
PRO SERIES Filter Cleaner is a highly concentrated deep cleaning solution that removes buildup caused by: oils, grease, non-living organics and more on filters. It is very effective on cartridge elements, D.E. filter grids, sand filters and regenerative media filters. PRO SERIES Filter Cleaner improves filter efficiency and lengthens cycles between filter cleaning. PRO SERIES Filter Cleaner is compatible with chlorine, bromine and alternative sanitizing systems. Cleans without acid!
Naturally based filter cleaner, cleans without acid! Highly concentrated deep cleaning solution that uses SMARTZymes™ technology to removes oils, grease, non-living organics waste and more Effective on all filter types
PRO SERIES® Natural Clarifier™
Easy to use natural clarifier
Clears cloudy water quickly
Cannot be overdosed
Can be used at the same time as shock
Automatic Dosage Dispenser
100rpm, 2.5oz per min at 30/74 milliliters
115 VAC 50/60Hz
30 psi/2.07 bar nominal
9 GPD/ 34 LPD
Able to program up to 24 events per day
PRO SERIES® ProZymes® Pool
Uses SMARTZyme™ technology to reduce non-living organic contamination
Allows for increased filter cycles
Prevents waterline ring
PRO SERIES® Pipe Purge™
Cleans pool and spa plumbing of built up non-living organic waste using SMARTZyme™ technology
Removes the cause of many pool and spa water quality issues
Cleans where you can’t!
PRO SERIES® ProZymes® Spa
Uses SMARTZyme™ technology to reduce and help prevent scrubbing of waterline
Increases filter cycles
Superior water quality with less work
Clean & Perfect™ Commercial
Unique blend of SMARTZyme™ technology and surfactants make it the perfect indoor and outdoor cleaner
When used on the pool's tile line, reduces scrubbing and brushing
Great all-purpose cleaner that can be used on most surfaces including patio furniture, spa covers and surfaces, grills, and so much more
® Filter Cleaner ™ Instructions
Directions for use:
Directions for Cartridge Elements or Diatomaceous Earth filter grids:
Remove cartridge elements or D.E. grids from filter tank and hose off loose material.
Fill a pail, bucket or trash container with enough water to cover cartridges or grids.
Add 2L per 19 litres of water. If grids cannot be removed fill tank with water and add product to tank.
Place cartridge elements or D.E. grids in solution and soak for a minimum of 6 hours, preferably overnight.
Remove from solution and rinse thoroughly.
Directions for Sand filters:
Have pump running and filter in backwash mode. Suction should come primarily from skimmer, not main drain.
Add 4L to skimmer or surge tank.
Once contents of container has entered the filter, turn pump off and put valve in either close or filter position, for a minimum of 6 hours.
Turn pump on with filter set to backwash, run until water flows clear.
Do not allow pump to run dry. Return filter to normal operation.