Product Detail

PRO SERIES® Stain & Scale Control

Professional Strength - Professional Results

PRO SERIES Stain & Scale Control protects pools from the damaging effects of scale buildup and staining due to excessive calcium, iron, copper and other minerals. It works without the use of phosphates or harsh acids. This product also works very well at preventing/reducing scale from forming on chlorine generator cells and UV crystal lens in order to help maintain optimum performance. PRO SERIES Stain & Scale Control can be used with all sanitizing systems and is compatible with all pool surfaces.

PRO SERIES® Stain & Scale Control™ Image
  • Protects pool finishes and equipment from the damaging effects of metal staining and/or scale
  • Does NOT add phosphates like most other stain and scale products
  • Great for new plaster start-ups
  • Helps preserve salt generator cells from potential damage caused by scale buildup
Partner Products
Product Experience
  • Automatic Dosage Dispenser

    • 100rpm, 2.5oz per min at 30/74 milliliters
    • 115 VAC 50/60Hz
    • 30 psi/2.07 bar nominal
    • 9 GPD/ 34 LPD
    • Able to program up to 24 events per day

    View Product

Please share your positive experience with us and the rest of the world.

There are no testimonials for this product yet, feel free to leave one.


Click the letters to hear
captcha


PRO SERIES® Stain & Scale Control Instructions

Note: Cationic polymers used in many clarifiers, flocculants and polyquat algaecides should not be dosed to swimming pool water at the same time as metal control products. Cloudy water, precipitation and reduced product effectiveness may result. Wait 24 hours between additions.

Directions for use:

This product is designed for use in properly balanced pool water.

Initial Dose: Add 1L per 38,000 litres of pool water evenly around the edges. If water hardness level is above 400ppm (parts per million),metal readings are above 0.5ppm, or if being used during start-up of a new plaster pool, wait 24 hours and add a second initial dose.

Maintenance Dose for Scale Control- MONTHLY: Add 150mL per 38,000 litres of pool water per month.

Maintenance Dose for Metal Control- WEEKLY: Add 120mL per 38,000 litres of pool water per week.

Do not add product within 2 days of adjusting calcium hardness or during a full pool acid bath.

For new, remodeled or refinished pools: Add 1.89L per 38,000 litres. Add product to the pool water evenly around the edges after pool is full to reduce the chance of plaster dust formation, scaling, and metal staining. Balance pool water as needed (wait two days before adjusting calcium hardness).

Do not exceed recommended dose.

PRO SERIES Stain & Scale Control can be used in any type of pool and with all types of commercial pool sanitizing systems. It has no adverse effects on water chemistry.

Do not use with biguanides

×

Available Sizes

Please share your positive experience with us and the rest of the world.

Click the letters to hear
captcha


×
×