PRO SERIES® Filter Cleaner™ Instructions

Directions for use:

Directions for Cartridge Elements or Diatomaceous Earth filter grids:

  1. Remove cartridge elements or D.E. grids from filter tank and hose off loose material.
  2. Fill a pail, bucket or trash container with enough water to cover cartridges or grids.
  3. Add ½ gallon per 5 gallons of water. If grids cannot be removed fill tank with water and add product to tank.
  4. Place cartridge elements or D.E. grids in solution and soak for a minimum of 6 hours, preferably overnight.
  5. Remove from solution and rinse thoroughly.

Directions for Sand filters:

  1. Have pump running and filter in backwash mode. Suction should come primarily from skimmer, not main drain.
  2. Add 1 gallon to skimmer or surge tank.
  3. Once contents of container has entered the filter, turn pump off and put valve in either close or filter position, for a minimum of 6 hours.
  4. Turn pump on with filter set to backwash, run until water flows clear.
  5. Do not allow pump to run dry. Return filter to normal operation.